Ip Address - Planet WAP-7000 User Manual

Type Password Again
Re-type the new password again.
SSH Server
Enable or disable the built-in SSH server. SSH is a secured telnet-like mechanism to invoke
the command line interface. All the commands and response will be encrypted. The SSH port
is 22. You need to have an SSH client to access SSH server.
SNMP Community
Enter the community string, usually either "Public" or "Private".
Trap Receiver
Trap is the notification of certain events generated by SNMP agent to send to a network
management server. To have the WAP-7000 send SNMP trap, you need to enter the IP
address of the server where the trap is sent.
There are two trap messages, "Cold Start" and "Link Up", are supported. They are sent out
whenever the system is started.
UPDATE
Click "Update" and then "Reboot" button when you finish setting up for parameter changes
taking effect.

4.2 IP Address

There are two methods to assign IP address to WAP-7000: Manually configure or DHCP.
- 10 -