Table of Contents
Advertisement
The WAP-7000 starts a new era for wireless building-to-building solution by providing high performance
in 5GHz frequency. With 802.11a compliance, the WAP-7000 can avoid the interferences from other
802.11b/g devices and contributes the 54Mbps data rate. It is suited for enterprises, campus or off-site
locations to extend existing wired network coverage.
The special designed housing allows WAP-7000 to be installed in exposed locations under the rigorous
weather conditions including heavy rain, wind, and snow. Moreover, the WAP-7000 has built in the
lightning protector for further protection. Provided with web-based interface, WAP-7000 is easy to be
installed and managed. The POE (Power Over Ethernet) design reduces power cables installation cost
and offers more flexibility when selecting the location of WAP-7000.
1.1 Package Contents
Make sure that you have the following items:
•
WAP-7000 x 1
•
Power Adapter x 1
•
DC injector x 1
•
Mounting kit x 1
•
CAT5 cable with RJ-45 plug and ODU connector x 1
•
N-type to N-type connector cable x 1
•
Quick Installation Guide x 1
•
Utility and User's manual CD x 1
If any of the above items are missing, contact your supplier as soon as
Note:
possible.
1.2 Features
‧ Wireless LAN IEEE802.11a 5GHz compliant
‧ Available channels selectable conforming to local radio restrictions on 802.11a standard
‧ Solid housing provides protection against rigorous weather conditions
‧ Point-to-Point, Point-to-MultiPoint bridge
‧ Theoretically, the operating range can up to 17KM at 6Mbps data rate with 5GHz 18dBi antenna
installed
‧ Adjustable output power: 100mW, 50mW, 25mW, 13mW, and 6mW
‧ Power over Ethernet design
‧ Built-in lightning protector
‧ Operating temperature: -20~70 degree C
Chapter 1 Introduction
- 1 -
Advertisement
Table of Contents
