Disc Navigator Menu Options - Pioneer DVR-920H Operating Instructions Manual

09 Editing
1 Press HDD or DVD to select the hard disk drive or
the DVD.
2 Press DISC NAVIGATOR to display the Disc
Navigator screen.
Playback will automatically stop when you do this.
Disc Navigator
Original
DVD
Play
Erase
Ttl Name
Chpt Edit
Erase Sec
Undo
• You can also access the Disc Navigator from the
Home Menu (press HOME MENU, select Disc
Navigator then press ENTER).
• Use the
the command you want from the menu options on
the left, then press ENTER. Most commands require
you then to select a title (or chapter) or location from
the thumbnail views area of the screen. Use the
(cursor buttons) followed by ENTER to do
this.
• When in the thumbnails area of the screen, use the
PREV ( ) and NEXT (
previous/next page if there are more than six titles/
nine chapters.
• As you highlight different thumbnails, information
about the title is shown in the central area of the
screen. Press DISPLAY to change the information
displayed.
• If you are editing a VR mode disc, press PLAYLIST to
switch between Original and Play List Disc Navigator
screens.
Disc Navigator
Play List
DVD
Play
Erase
Ttl Name
Chpt Edit
Erase Sec
Undo
• Press RETURN to get back to the menu options on
the left from the thumbnail area of the Disc
Navigator.
88
En
1 2 3
DVD Remain
0h37m(FINE)
4 5 6
(cursor up/down) buttons to highlight
) buttons to display the
Playlist / Original indicator
1 2 3
DVD Remain
0h37m(FINE)
4 5 6
• You can switch between the HDD and the DVD Disc
Navigator screens using the HDD and DVD buttons
(front panel or remote).
You can copy a selected HDD title to DVD, or DVD title to
HDD by pressing ONE TOUCH COPY (see also page 72
for more on One Touch Copy).
When editing HDD content, a row of group names
appears above the title thumbnails (see Editing HDD
groups on page 93 for more details). You can access
these by pressing
group is highlighted, then using the
right) buttons to select a group. Press ENTER to 'open'
the highlighted group.
Titles on the HDD marked with a
1/1
recordings set to Auto Replace Recording (see Editing a
scheduled recording on page 45).
Titles on the HDD marked with a
recorded titles that haven't yet been played.
3 To exit the Disc Navigator, press HOME MENU.
Remember
• You can change the thumbnail pictures used for titles
using the NAVI MARK button—see Changing the
thumbnail picture for a title on page 52.

Disc Navigator menu options

The commands available from the Disc Navigator for the
VR mode and Video mode discs and the HDD are shown
below.
Video mode
• Play – Play a title (page 89)
• Title Name (Ttl Name) – Name or rename a title
(page 90)
• Lock/Unlock – Lock or unlock a title to prevent
accidental changes being made (page 92)
• Erase – Erase a title (page 89)
• Erase All – Erase all titles (page 93)
• Undo – Undo the last change (page 93)
VR mode
• Play – Play a title (page 89)
1/1
• Title Name (Ttl Name) – Name or rename a title
(page 90)
• Lock/Unlock – Lock or unlock a title to prevent
accidental changes being made (page 92)
• Erase – Erase a title (page 89)
• Erase All – Erase all titles (page 93)
(cursor up) repeatedly until the All
icon are timer
icon are recently
(Original)
(cursor left/