Playback Settings - Pioneer DVR-920H Operating Instructions Manual

14 The Initial Setup menu
Navi Mark
• Default setting: 0 seconds
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
In the Disc Navigator, each title is shown with a still
frame picture to remind you what it is. This setting lets
you decide the default still frame. The default setting of 0
seconds takes the first frame of the title, but you can also
set it to 30 seconds or 3 minutes into the title (if the title
is shorter than the setting, then the first frame is used).
Auto Chapter (Video)
• Default setting: 10 minutes
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
When recording in Video mode, a new chapter is started
every 10 minutes on the default setting. You can change
this interval to 15 minutes, or switch off automatic
chapter marking altogether with the No Separation
setting.
Frame Accurate
• Default setting: Off
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
When Frame Accurate setting is Off, exact frame
accuracy is traded for high-speed copying when
recording a Copy List. Switch Frame Accurate On to
preserve the accuracy of the Copy List. However, copying
some edited Video mode titles will be done in real time.
118
En
Manual Recording
0 seconds
Optimized Rec 30 seconds
Navi Mark 3 minutes
Auto Chapter (Video)
Frame Accurate
DVD-RW Auto Init.
Manual Recording No Separation
Optimized Rec 10 minutes
Navi Mark 15 minutes
Auto Chapter (Video)
Frame Accurate
DVD-RW Auto Init.
Manual Recording
On
Optimized Rec
Off
Navi Mark
Auto Chapter (Video)
Frame Accurate
DVD-RW Auto Init.
Important
• When you change this setting the Copy List is erased.
Make sure it is set how you want it before you start
putting together a Copy List.
• The Frame Accurate setting has no effect on the
actual video content stored on the HDD.
DVD-RW Auto Init.
• Default setting: VR Mode
When you load a new, blank DVD-RW disc the recorder
automatically initializes it for recording. You can set it to
initialize the disc for VR mode or Video mode recording.
Initial Setup
Basic Manual Recording
Tuner Optimized Rec
Video In/Out Navi Mark
Audio In Auto Chapter (Video)
Audio Out Frame Accurate
Language DVD-RW Auto Init.
Recording
Playback

Playback settings

TV Screen Size
• Default setting: 16:9
Initial Setup
Basic TV Screen Size
Tuner Still Picture
Video In/Out Seamless Playback
Audio In Parental Lock
Audio Out Angle Indicator
Language
Recording
Playback
If you have a widescreen TV, select the 16:9 setting—
widescreen DVD software is then shown using the full
screen area. When playing software recorded in
conventional (4:3) format, the settings on your TV will
determine how the material is presented—see the
manual that came with your TV for details on what
options are available.
If you have a conventional TV, choose either 4:3 (Letter
Box) or 4:3 (Pan & Scan). In Letter Box mode,
widescreen software is shown with black bars at the top
and bottom of the screen. Pan & Scan chops the sides off
widescreen material to make it fit the 4:3 screen (so even
though the picture looks larger on the screen, you're
actually seeing less of the movie). See Screen sizes and
disc formats on page 124 for more information.
Note that when the recorder is connected to a TV or
monitor via HDMI, the aspect ratio is fixed at 16:9.
VR Mode
Video Mode
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9