Pioneer DVR-920H Operating Instructions Manual page 122

14 The Initial Setup menu
About HDMI Output default settings
If you disconnect an HDMI-compatible device then
reconnect (to the same device), the settings you make in
the HDMI Output screen are maintained. If you connect
a different device, the following settings are
automatically set:
HDMI-compatible device
• Aspect – Progressive (Full)
• Colour – Component (12-bit) (However, if the
connected device is not compatible with 12-bit
component colour format, then the setting will be
Component.)
• Audio Output – Auto (However, if the connected
device is compatible only with PCM audio then the
setting will be PCM.)
• Bilingual Setting – If Audio Output is set to Auto,
then this is set to On.
HDCP-compatible DVI device
• Aspect – Progressive (Full)
• Colour – RGB Full Range
122
En