Resuming Playback From Where You Stopped; Stopping Playback And Switching Power Off - Pioneer DV-S88A Operating Instructions Manual

Resuming playback from
where you stopped
-
DVD-Video/Video CD
Use the resume feature to restart playback from the
point that the disc was stopped last time.
Press STOP 7 once.
The display shows "RESUME" and the stop position is
memorized.
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP 7 twice causes the disc to return to
the beginning when PLAY 3 is pressed again. The
display shows the disc type (DVDs or Video CDs).
Press PLAY 3.
Playback starts from the resume position.
Notes
• The actual restart position may be slightly before or after
the resume position.
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead (page 59).
• Resume is not possible with DVD-Audio discs.
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
4(4)
DISPLAY AUDIO
SET UP
MENU
ENTER
FUNCTION VIDEO
MEMORY ADJUST
F.MEM V.ADJ
STOP
1
7
PREVIOUS NEXT
4 ¢
RETURN STEP / SLOW
e
1 2
4 5
7 8
RANDOM REPEAT
3
4(5)
1
Press STOP 7 (7/0 on the front panel).
Playback stops.
2
Press OPEN/CLOSE (7/0 on the front
panel).
The disc tray comes out.
3
Remove the disc.
4
Press STANDBY/ON on the front panel
( on the remote control). (DV-S88A)
The disc tray goes back in.
4
Press on the remote control. (DV-S838A)
The disc tray goes back in.
5
Press POWER on the front panel to turn
the player's power off. (DV-S838A)
2
OPEN /
CLOSE
SUBTITLE ANGLE
TOP MENU
DIMMER JOG MODE
FL JOG
PLAY PAUSE
3 8
REV FWD
1 ¡
SEARCH MODE
E
CLEAR
3 C
6 + 10
9 0
PROGRAM
A-B
1, 2
AUDIO VIDEO /
27
En