Toshiba D-VR4SU Owner's Manual page 66

÷
{ iting a p[ay[ist
NOTE:
It is no probiem to omit the proce-
dures for confirming the scene or
adjusting start and end points.
5
6
7
8
Press • or • to select "SET START" at the start point of the
scene that you want to erase and press ENTER. (To set the start
point easily, search the start point while "SET START" is selected)
The still image at the start point appears at the Ieft small screen.
CHAPTER 2_3 00:!1:4'_ ....
_r_ulga
Press • or • to seiect "SET END" at the end point of the scene
you want to erase and press ENTER.
The still image at the end point appears at the right small screen.
CHAF[ER 2_3 i _
Check the erased scenes.
, Select "Preview" and press ENTER. Then the video where the
scenes between the start and end points are erased is played
back.
, Each operation button (RFWD, REW, SKiP +, SKIP -, PLAY,
PAUSE/STILL) for playback also can be used.
Adjust the start and end points.
, To adjust the start point, select "Adjust start" and press ENTER.
You can change the start point by pressing • or _,.
, To adjust the end point, select "Adjust end" and press ENTER.
"Youcan change the end point in the same way as the start point.
÷
9
If you determine the scene to be erased, press • or • to select
"Finish" and press ENTER.
, A chapter mark is automatically added at the location of the
erased scene.
66
2G10101A P62-P70 56 _ 2/25/05, 1:32 AM