Setting The Disc; Reformat; New Disc Format; Finalize - Toshiba D-VR4SU Owner's Manual

÷
g the disc
You can format, protect, or finamize a disc,
Preparation:
• Turn ON the TV and set it to the video input mode=
• Select "DISC SETUP" from "SYSTEM SETUP"= For
the procedure, see steps 1 to 3 in "Using the SETUP
MENU" on page 23=
REFORMAT
"Youcan format a recorded DVD-RAM/RW.
Check the content of the disc before format. If you for-
mat the disc, the recorded content of the disc will be
erased.
To format a disc in the Video mode, select "REFOR-
MATAS DVD VIDEO", and to format it in the VR mode,
select "REFORMAT AS DVD VR'L You cannot select
"REFORMAT AS DVD VDEO" when DVD-RAM in-
serted. The screen below will appear.
• When you select "START" and press ENTER, format
will start. The screen below will appear.
• When you select "CANCEL" and press ENTER, the
DISC SETUP screen will appear=
NOTES:
• You cannot format Ver. 1.0 DVD-RW and DVD-R.
• You cannot format a disc if the disc protection is "ON"=
In such a case, be sure to cancel the disc protection
(see page 28) before format=
• You cannot format a DVD-RAM in the Video mode=
NEW DUSC FORMAT
If you insert an unused DVD-RW disc, the disc is auto-
matically formatted=
If you use the DVD-RW (Ver.1.1/1.2), you can select
the mode to be used for automatic format=
Select "NEW DISC FORMAT" and select the mode from
the list below=
VR: Format the disc in the VR mode=
VIDEO: Format the disc in the Video mode=
=<
When you insert an unused disc, the following mes- o"
sage screen will appear.
N"
• When you seIect "START" and press ENTER, format
will start= The screen below will appear=
• When you seIect "CANCEL" and press ENTER, the
normaI TV screen will appear=
NOTE:
If a recorded disc has scratches or contamination on it,
the "NEW DISC FORMAT" screen may appear=
If this happens, select "CANCEL"=
FINAUZE
To play a DVD disc recorded on this unit you must finalize
the disc to insure compatibility with other DVD players= In
addition if you are using a DVD-RW disc you must record
in Video mode=
When "FINALIZE" is selected, the screen below wilI
appear.
• When you select "START" and press ENTER, final-
ization will start= The screen below will appear=
• When you select "CANCEL" and press ENTER,
the DISC SETUP screen will appear= 27
÷
2G10101A P22-P32 27 _ 2/26/05, 3:13 PM