Component; Audio - Toshiba D-VR4SU Owner's Manual

with the TV or audio component
Connect to a stereo ampJifier with audio output
Yea can enjoy high quality audio by connecting the audio output to your amplifier.
Connect the audio output jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier.
Audio (L) output
StereoAmplifiero '_
0000 UUUUUU
ToAudio (L) input --_-- ToAudio (R) input
J
Audio cable (not supplied)
DVD/VCR Audio (R) output
Connect to an AV AmpJifier with builtdn digitaJ surround
If you are using an Ampiifier with a built-in digital surround as follows, you can enioy the various audio systems
such as Dolby Digital and DTS by using the optical or coaxial digital outpuL
Use this connection to connect an:
• AV ampmifier with buiJt-in *Domby Digital decoder
• AV ampmifier with built-in *DTS decoder
NOTE:
You may connect to a TV with a component
video cable (not supplied) or S-Video cable
(not supplied) instead of a video cable (not
supplied).
=_
0,%
÷ ÷
AV Amplifierwith built-invarious
DVD/VCR decoder as above
Connecting the opticaJ digital cable
You may connect to an AV AmpJifier with an optical digitaJ cabme (not suppJied) instead of a coa×iam digitam
cabme.
When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel.
When not using the optical digital cable, attach the dust protection cap to protect against dust.
NOTES:
• The DVD OUTPUT jacks (OPTICAL, COAXIAL, AUDIO L/R and COMPONENT) are usefum onmy for DVD
section. The VNS signam is output onmyfrom the S-Video output jack, composite jacks (DVD/VCR OUT-
PUT) and UHF/VHF OUT.
• When you make the connections above, do not set DOLBY DIG FAL to DOLBY DIGITAL or DTS to ON on the AV
amplifier. If you do, a loud noise wiIJ suddenly come out from the speakers, affecting your ears or causing the
speakers to be damaged.
• Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input
connector) which does not contain a Dolby Digita! or DTS decoder. Otherwise, any attempt to play DVDs may
cause such a high level of noise that it may be harmful to your ears and damage your speakers.
• DTS audio wiJJbe output onJy from the COAXIAL or OPTICAL output. To hear DTS audio, DTS-Decoder is
necessary.
• When playing DTS-encoded CDs, only noise will be heard from the speakers or analog stereo outputs.
• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
• The optical or coaxial digital output jack output sounds in the bitstream.
21
2G10101A PI2-P21 21 _ 2/25/05, 1:30 AM