Step 5 Adjusting The Lcd Screen And The Viewfinder; Adjusting The Brightness Of The Lcd Screen - Sony Handycam DCR-DVD100E Operating Instructions Manual

Step 5 Adjusting the LCD screen and the viewfinder

Adjusting the brightness of the LCD screen

Adjust the brightness of the LCD screen properly in your sight.
1
Open the LCD screen while pressing OPEN.
2
Turn the power on by sliding the POWER switch upward while pressing the
green button.
3
Press SETUP.
The SETUP display appears.
4
Select
5
Select [LCD BRIGHT] with v/V, and press ENTER.
6
Adjust the brightness of the LCD screen with b/B, and press ENTER.
b: Get darker
B: Get brighter
The LCD screen brightness is adjusted.
7
Press SETUP.
The SETUP display disappears from the LCD display.
Tips
•You can change the brightness of the backlight. Select
B.L.] in the SETUP display when using the battery pack (page 111).
•The [LCD BRIGHT] and [LCD B.L.] settings do not affect the brightness of the image
when you are recording.
24
-GB
MANUAL SET
PROGRAM AE
P EFFECT
D EFFECT
WHT BAL
AUTO SHTR
[ SETUP ] : END
(LCD/VF SET) with v/V, and press ENTER.
LCD / VF SET
LCD BRIGHT
LCD B. L.
LCD COLOUR
VF B. L.
RETURN
[ SETUP ] : END
LCD / VF SET
LCD BRIGHT
[ SETUP ] : END
(LCD/VF SET) then [LCD