Sony Handycam DCR-PC109 Operation Manual page 87

I>AUTO Select to display tile remaining tape indicator for about 8 seconds:
• Afte! you select the CAMERA-TAPE :node with the cassette
inse:ted, and your camcorder calculates the remaining amount of
tape.
• When you touch _ (play/pause).
ON Select to always display the remaining tape indicator
DON Select when using the Remote Commande: supplied with your
camcorder.
OFF Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by anothe: VCR
remote control unit
fO Note
• The setting returns to [ON] when you have the power somce discolmected from yore
camcorder fo:::lore than 5 minutes.
DON Select to turn on the camera recording lamp on the front of your
camcorder during recording.
OFF Select this setting in the tbllowing recording situations The can:era
recording lamp will not ligN up &_ring recording.
• When you do not want the subject to be ne:_,,ous about being
recorded.
• When you are recording close to the subject
• When the subject reflects the recording lamp
I>MELODY Select to sound a melo@
when you start/stop recording, operate the
tOllCh panel, or when
an
:II:llSllal condition occtns on your camcorder.
NORMAL Select to sound a beep instead of the melody
OF F
Select to cancel the melody, the beep so:rod, the shutter so:rod or touch
panel operation confirmation beep
m
t-
¢€1
c
,_continued
Using the Menu 87