Poulan Pro ES300 Instruction Manual page 6

Computed kickback angle (CKA) Table
MODEL P/N BAR Lenqth
ES300 952044758 14
SAFETY NOTICE: Exposure to vibra-
tions through prolonged use of hand
tools could cause blood vessel or nerve
damage in the fingers, hands, and joints
of people prone to circulation disorders
or abnormal swelling. Prolonged use in
cold weather has been linked to blood
vessel damage in otherwise healthy
people, If symptoms occur such as
numbness, pain, loss of strength,
change in skin color or texture, or loss of
feeling in the fingers, hands, or joints,
discontinue the use of this tool and seek
medical attention, An anti-vibration sys-
tem does not guarantee the avoidance
of these problems, Users who operate
power tools on a continual and regular
basis must closely monitor their physical
condition and the condition of this tool.
DOUBLE INSULATION
CONSTRUCTION
This unit is double insulated to help pro-
tect against electric shock. Double in-
sulation construction consists of two
separate "layers" of electrical insulation
instead of grounding.
Tools built with this insulation system are
not intended to be grounded. No
grounding means is provided on this
unit, nor should a means of grounding
be added to this unit.
Safety precautions must be observed
when operating any electrical tool. The
CHAIN P/N CKA
952051469 20 °
double insulation system only provides
added protection against injury resulting
from an internal electrical insulation
failure.
_kWARNING: All electrical repairs to
this unit, including housing, switch, motor,
etc,, must be diagnosed and repaired by
qualified service personnel, Replacement
parts for a double insulated appliance
must be identical to the parts they replace.
A double insulated appliance is marked
with the words "double insulation" or
"double insulated". The symbol []
(square within a square) may also be
marked on the appliance. Failure to have
the unit repaired by authorized service
personnel can cause the double insula-
tion construction to become ineffective
and result in serious injury.
STANDARDS: This product is listed by
Underwriters Laboratories, Inc. in accor-
dance with UL Standard 1662 and CSA
Standards Z62.1 and Z62.3 and ANSI
B175,1.
ANSI B17&1-2000 "American National
Standard for Powered Tools - Safety Re-
quirements"
CSA Z62.3 "Chain Saw Kickback Occu-
pational Health and Safety"
CSA Z62.1 "Chain Saws - Occupational
Health and Safety"
SAVE THESE INSTRUCTIONS
CARTON CONTENTS
Check carton contents against the fol-
lowing list.
• Chain Saw (fully assembled)
• Bar Sheath
Examine parts for damage. Do not use
damaged parts.
NOTE: If you need assistance or find
that parts are missing or damaged,
please call 1-800-554-6723.
ASSEMBLY
Your unit is fully assembled; no assembly
is required.