How To Change Function Settings; Using The Direct Keys - Pentax K-X Operating Manual

Function settings can be changed using the direct keys, the control panel
or the menu.
This section explains the basic ways to change function settings.
In Capture mode, you can set Drive Mode, Flash Mode, White Balance
and Sensitivity by pressing the four-way controller ( • • • • ), and set AF
point by pressing the OK button. (p.78)
Below, how to set the flash mode will be explained as an example.
1
Press the four-way controller (v)
in Capture mode.
The [Flash Mode]screen appears.
2
3
Use the four-way controller ( • • )
to select a flash mode.
liii!iiii_WA_,,
Press the
OK
button.
The camera is ready to take a picture.