NordicTrack C2150 24917.0 User Manual page 10

Insert the wires into the Left Upright (89) as you
set the console assembly on the Left and Right
Uprights (89, 90). Be careful not to pinch the
Upright Wire (84).
Attach the console assembly with four 5/16" x
1 1/2" Screws (5) and four 5/16" Star Washers
(10). Start all four Screws, and then tighten
them.
Console
Assembly
.
Identify the Left Handrail (87), which is marked
"Left." Insert the Left Handrail between the con-
sole assembly and the pulse assembly.
Attach the Left Handrail (87) with two 5/16" x 2"
Screws (4), a 5/16" x 3 3/4" Screw (2), and three
5/16" Star Washers (10) as shown. Start all
three Screws, and then tighten them.
Attach the Right Handrail (not shown) to the
console assembly as described above.
Console
Assembly Pulse
Assembly
10