NordicTrack CX 1050 NEL12940 User Manual page 8

8. Applya liberal a mount o fgrease tothelongsideof
eachM8x 79mmBoltSet(65).
Identify the LeftPedal ( 10),whichhasa notchnear
therightside.PlacetheLeftPedal o nthe LeftPedal
Leg(4).Havea second person holdthebracket o n the
leftUpper BodyLeg(31)inside of thebracket o nthe
LeftPedal L eg,andholda Wheel ( 28)insideofthe
bracket o ntheleftUpper BodyLeg.
Aligntheindicated holes, a ndattach the LeftPedal
(10),theleftUpper BodyLeg(31),andtheWheel ( 28)
tothe LeftPedal L eg(4)withanM8x 79mmBoltSet
(65).Attachtherearof theLeftPedal t otheLeftPedal
LegwithtwoM8x 54mmButton Screws (83).
Repeat thisstepontherightsideoftheelliptical e xer-
ciser.
Seestep4.Tighten thetwoM10x 108mm Button
Screws (70).
9. Haveanother p erson holdtheConsole (17)nearthe
Upright ( 2).
Connect t heUpper W ireHarness (115) t o thewirehar-
nessonthe Console (17).Connect the Pulse
Extension W ire(114) t o thepulse wireontheConsole.
Next,locate thetwoground wiresthatareattached
witha screwtothe Upright ( 2).Connect theground
wiresto thetwosmallest wiresontheConsole.
Carefully insert a llexcess wiringupintotheConsole
(17)anddownintotheUpright ( 2).AttachtheConsole
tothe Upright w ithfourM4x 16mm Screws (98).
(Note: T heScrews maybe shipped intheconsole
box.)
Be careful to avoid pinching the wires.
10.Plug the Power Cord (116) into the Power Socket
(117) at the rear of the elliptical exerciser.
Grease
65
28
65
Do not pinch 17
the wires \
during this step.
Notch
4
83
Ground
Wires
11. Make sure that all parts of the elliptical exerciser are properly tightened. Cover the floor beneath the
elliptical exerciser to protect the floor from damage. Note: Some extra hardware may be left over.