NordicTrack CX 1050 NEL12940 User Manual page 10

Next,holdthechestpulsesensor n eartheconsole.
Whileholding onethumbstationary, begintapping
theotherthumbagainst t heelectrode areaata rate
ofaboutonetappersecond. C heck theheartrate
reading onthe console.
• If thechestpulse sensor d oesnotfunction properly
afteryouhavefollowed allof theabove instructions,
thebattery shouldbereplaced inthefollowing way:
Locate thebattery
coveronthe backof
thesensor u nit.Insert
a coinintotheslotin
thecover, t urnthe
covercounterclock-
wise,andremove the
cover.
I
Remove the old bat-
tery and insert a
new CR 2032 bat-
tery. Make sure that
the battery is
turned so the writ-
ing is on top.
Replace the battery
cover and turn it
clockwise to close it.
, CR 2032
,_Battery
CHESTPULSESENSOR CARE
Thoroughly dry the chest pulse sensor after each
use. The chest pulse sensor is activated when the
electrode areas are wetted and the chest pulse sen-
sor is put on; the chest pulse sensor shuts off when
it is removed and the electrode areas are dried. If
the chest pulse sensor is not dried after each use, it
may remain activated longer than necessary, drain-
ing the battery prematurely.
• Store the chest pulse sensor in a warm, dry place.
Do not store the chest pulse sensor in a plastic bag
or other container that may trap moisture.
Do not expose the chest pulse sensor to direct
sunlight for extended periods of time. Do not expose
the chest pulse sensor to temperatures above 122 °
Fahrenheit (50 ° Celsius) or below 14 ° Fahrenheit
(-10 ° Celsius).
• Do not excessively bend or stretch the sensor unit
when using or storing the chest pulse sensor.
• Clean the sensor unit using a damp cloth--never
use alcohol, abrasives, or chemicals. The chest
strap may be hand washed and air dried.
10