NordicTrack C2255 NTL07806.2 User Manual page 18

THE USER'S MODE
The console features a user's mode that keeps track of
the total number of miles that the walking belt has
moved and the total number of hours that the treadmill
has been operated. The user's mode also allows you
to select miles or kilometers as the unit of measure-
ment and to turn on and turn off the demo mode.
When the user's mode is selected, you can also
choose an audio setting and a volume setting for your
iFIT workouts.
To setect the user's mode, hold down the Stop button
while inserting the key into the console.
The upper left digit(s) in the
display will show the total
number of hours that the
treadmill has been used.
The lower right digit(s) in the
display will show the total
number of miles (or kilome-
ters) that the walking belt has
moved.
An "E" for English miles or an
"M" for metric kilometers will
appear as the top right digit in
the display. Press the 1 Step
Speed increase button to
change the unit of measure-
ment if desired.
When you use an iFIT Card,
a personal trainer will guide
you through your workouts
and give detailed instructions
if "P" is selected as the audio
setting. If you turn off the "P"
setting, your personal trainer will simply guide you
through your iF[T workouts. Press the 1 Step Incline
decrease button to change the audio setting.
You can adjust the volume of
the personal trainer audio (0
through 5) by pressing the 1
Step Inc_ine increase button
repeatedly. The volume set-
ting appears as the lower mid-
die digit in the display.
IMPORTANT: If a "d" appears
nextto the "E" or "M," the con-
sole is in the "demo" mode.
This mode is intended to be
used only when a treadmitt is
displayed in a store. When the
console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the indicators in the display will automatically light
in a preset sequence; the buttons on the console will
not operate. If a "d" appears when the user's mode
is selected, press the I Step Speed decrease button
$o the "d" disappears.
To exit the user's mode, remove the key from the con-
sole.
1B