5.
Finish securingchutecontrolassemblyto chute supportbracket
with wingnut and hex screwremoved earlier.See Figure4.
6.
Checkthat all cables are properlyroutedthroughthe cableguide
on top of the engine.See Figure5.
7.
The extensioncord forthe electricstarteris fastenedwith a cable
tie to the rear of the augerhousingfor shippingpurposes.Cut the
cabletie and removeit beforeoperatingthe unit.
SET-UP
Shear
Pins
Holesare locatedin the plasticdashpanelfor convenientshearpin
storage.See Figure6. Referto the Operationsectionfor moreinforma-
tion regardingshearpin replacement.
Figure5
f
Figure4
Figure6
9