Storage; Replacement Parts And Accessories; Repair Service; Battery Recycling - Remington RM0818B Owner's Manual

18 volt cordless polesaw & chainsaw
Hide thumbs Also See for RM0818B:
Table of Contents

Advertisement

Available languages

Available languages

STORAGE
If storing saw for more than 30 days, follow
steps below.
1.
Remove battery from chain saw.
2.
Charge battery completely.
Note: It
could take up to 9 hours to complete-
ly charge the battery.
3.
When battery is completely
charged,
remove from charger and put protec-
tive cap on battery terminals.
IMPORTANT: To prolong battery life,
avoid leaving battery on charger for
extended periods of time (over 30
days without use).
4.
Remove and clean guide bar and
chain. Clean guide bar and chain by
soaking in petroleum based solvent
or mild soap and water mixture.
5.
Dry guide bar and chain.
6.
Place chain in container filled with
oil. This will prevent rust.
7.
Wipe a thin coating of oil over sur-
face of guide bar.
8.
Wipe off outside of saw body. Do this
with soft cloth dampened with a mild
soap and water mixture.
9.
Store chain saw and battery
* in a high or locked place, out of chil-
dren' s reach
* in a dry place
* in a carrying case or with scabbard over
guide bar
REPLACEMENT PARTS
AND ACCESSORIES
-!
WARNING:
Use only
replace-
ment
parts
and
accessories
de-
scribed in this manual.
Use of other
parts or accessories
could damage
saw or injure operator.
For original replacement
parts and acces-
sories,
call
1-866-206-2707
(in Canada,
call 1-877-696-5533)
orvisit
vvv_:.remingtonpowertools.conl.
REPLACEMENT
PARTS
1. Battery
725-05032 (l_M18VN)
2. Battery Charger
725-05031
REPAIR SERVICE
Note: Only use original replacement
parts.
This will protect your warranty coverage for
parts replaced under warranty.
For service, please call the Customer
Support
Department
to obtain
a list of
authorized service dealers near you.
Service on this unit, both within and after
the warranty
period, should only be
performed
by an authorized and approved
selwice dealer.
Call 1-866-206-2707 (in Canada call
1-877-696-5533)
or visit
wv_a:.remingtonpowertools.com.
BATTERY
DISPOSAL
AND
RECYCLING
This product uses nickel-cadnium
bateries.
Local, state, or federal laws may prohibit
disposal of nickel-cadnium
batteries in the
ordinary trash.
To help protect the environment
and con-
serve natural resources,
please dispose of
batteries properly.
You may contact your
local recycling
center
for inti)rmation
on
where to drop off the batteries.
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm0818bps

Table of Contents