Magnavox ZV457MG9 Owner's Manual page 13

O
1. AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this
unit.
2. HDMI OUT jack (DVD only)
Use an HDMI cable to connect to a display with an
HDMI compatible port.
3. ANTENNA OUT jack (DVD/VCR)
Use to connect an RF coaxial cable to pass the signal
from the ANTENNA IN to your TV monitor.
4. ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
5. AUDIO OUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
6. VIDEO OUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
7.VIDEO IN jack (L1) (DVD/VCR)
Use to connect external device with an RCA video
cable.
8. AUDIO IN jacks (L1) (DVD/VCR)
Use to connect external device with an RCA audio
cable.
u,o}
©
©
I O<i
9. S-VIDEO IN jack (L1) (DVD/VCR)
Use to connect the S-video output of external device
with an S-video cable. ::s
©
10. COMPONENT VIDEO OUT jacks (DVD only) 8
Use to connect a TV monitor with component video _::_"_
inputs with a component video cable. _i_
11. S-VIDEO OUT jack (DVD only)
Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
12. AUDIO OUT jacks (DVD only) °!:;_
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
13. COAXIAL DIGITAL AUDIO OUT jack (DVD only)
Use to connect an AV receiver, Dolby Digital decoder
or other device with a digital audio coaxial input jack
with a digital audio coaxial cable.
D
O
o
EN 11