Magnavox ZV457MG9 Owner's Manual page 100

"IIIIIi°IOUBL HOOTI NQ
There is no picture. • If you connect the cable to S-VIDEO OUT/COMPONENT VIDEO OUT I
HDMI OUTjack, connect it to AUDIO/VIDEO OUTjack instead.
Picture noise appears. • Head cleaning for VCR may be necessary. Refer to "Auto head cleaning"
(page 5).
• Adjust tracking control for better picture by pressing [CHANNEl. +/--]
while you are playing back a cassette tape.
The cassette tape does not play back. • No cassette tape is inserted.
Recording does not start afteryou press • Make sure the cassette tape has an erase-protection tab when you
[REC O]. record to a cassette tape. If needed, cover the hole with cellophane
tape.
The remote control does not function. • Check if a cassette tape is in this unit.
The motor rotates even when • The motor may rotate for the duration of approximately 5 minutes for
playback / recording is stopped, efficient operation. This is not a malfunction.
- Can I record to CD-RW/-R?
- Can I play back DVD-video that is bought in another
country?
- Can I connect the unit to my PC?
- Can I program a timer recording with cable/satellite
box?
- Can I record one channel while watching another
channel using a cable / satellite box?
- Can I connect this unit directly to a TV which only has
an antenna in jack using an RF coaxial cable?
- Can I change the channels on the cable / satellite box
using the remote control of this unit?
No, this unit records only DVD.
Possible when the region code of the disc is 1 and All.
No, you cannot control the unit by PC.
Yes, you can. Select "L1" or "L2" as your recording channel,
and leave the cable / satellite box on (pages 17, 42-45).
It depends on your connection configurations. For more
details, please kindly contact your cable / satellite provider.
No. You need an RF modulator (commercially available)
to connect this unit to a TV which only has an antenna in
jack (page 16). This unit does not have an RF modulator.
No. Changing the channels on the cable / satellite box using
this unit's remote control is not possible. You need to use
the remote control supplied with the cable / satellite box to
change the channels on the cable / satellite box.
98 EN
OutputJacks
: Available
Available for
234 5
iiiiiiii
v'
: Not available