Table of Contents
Advertisement
DESCRIPTION
OF CONTROLS
(CONTINUED)
FRONT
• STOP/EJECT
BUTTON
TO stop the tape. TO remove a cassette in the stop
mode.
• PLAY/STILL
Bun'oN
To play back a tape. In SLP playback, press this
button once more to view a still picture.
• POWER INDICATOR
This indicator flashes when an operation button is
pressed on the Remote Control.
• POWER BU'R'ON
- To set the VCR for unattended recordings after
timer settings have been completed.
- To turn the VCR on and off.
WIRELESS
REMOTE CONTROL
• VCRil"V SELECTOR
VCR position: To view playback or to monitor video
recordings. VCR Indicator on the
VCR appears.
TV position: To watch TV or to view one program
while recording a different program.
When this is set to "FV, there is no
indication on the VCR.
• CHANNEL
MEMORY BUTTON
This button is normally OFF. For CHANNEL
MEMORY programming, hold this button down and
press NUMERIC
Key "1" to use the AUTO SET
feature.
• ADD/DELETE
BUTTON
Used to add or delete a selected CHANNEL.
• CHANNEL
CALL BUTTON
When pressing this button, the number of the
channel tuned will be displayed on the TV screen
momentarily.
• COUNTER
CALL BUTTON
Press this button to display or clear the tape
counter/counter
memory/tape speed display.
• TIME CALL BUI-rON
Press the TIME CALL Button to display or clear the
date and time from the TV screen.
• REWIND/SEARCH
BUTTON
To rewind tapes. Also, during playback press this
button to view the picture in rapid reverse.
• CLEAR BUTTON
Press this button to clear the settings for the
displayed program contents.
While setting the clock or a program, each press
of this button starts the digit to the left flashing for
correction.
• PROG BUTTON
Press this button to display the MENU screen to
select either clock adjustment or the Timer
programming mode.
• STANDBY BUTTON
Used along with O.T.R. Button, to set a delayed
(Preset) O.T.R..
• ONE TOUCH RECORD (O.T.R.) BUTTON
Select the channel and press the ONE TOUCH
RECORD Button to start recording immediately for
30 minutes to 4 hours of recording, or until tape
ends. In any case power shut off is automatic.
• PAUSE/STILL
BUTTON
To temporarily stop the tape during recording or to
view a still picture during playback.
• FAST FORWARD/SEARCH
BUTTON
To rapidly advance the tape. Also, during playback
press this button to do rapid forward visual search.
• TAPE SPEED SELECTOR (SP/LP/SLP)
BUTTON
Set this selector for the desired recording speed.
REAR
• CHANNEL 3/4 SWITCH
Set to channel 3 or 4 (whichever is not used for
regular "IV broadcasting in your area) to use your
TV as a VCR program monitor.
See "TO GET STARTED" on page 1.
LOAD THE BATTERIES AS FOLLOWS:
1
Lilt off the !id affer pcessing i_
and upon the lid latch _th _
your thumb nail or other
narrow object.
Install two batteries as
f-
indicated i_
the_ery
Compartment.:
"
:;
_ap
iid into place.
BATTERY REPLACEMENT
CAUTION
• Do not mix old and new batteries.(AIso never mix alkaline batterieswith manganesebatteries.)
-5-
Hide quick links:
Advertisement
Table of Contents
