Magnavox VR9720AT01 Operating Instructions Manual page 18

TIMER
RECORDING (CONTINUED)
DALLY RECORDING:
P ON _ OFF CH
1 _yERYDAY
_10:00P* --: ....
SET REC-ON TIME
EXIT,,PROG KEY
i
To record at the same time each day.
1. Use the same steps 1-2 on page 15.
2. After completing step 3 on page 15 the display shown under "DAY" will appear
for rec-on day.
3. Enter key (_to select the Daily Recording mode.
The screen shown at the left will appear.
4. Continue with the programguide shown on pages 15 and 16 to complete programming.
WEEKLY RECORDING: To record at the same time on the same day each week.
P ON $' OFF I,,CH
1 EVERYWEEK ON'_-_
--:-- .) .-:--I -.
S_J,,I MO..2 TU..3
WE,.4 TH..5 FR..6
SA.. 7
EXIT, .PROG KEY
P ON _ OFF CH
I _ERYWEEK ON SU
;Z#:00P_ --: ....
SET REC-0N TIME
EXIT..PROG KEY
1. Use the same steps 1 - 2 on page 15.
2. After completing step 3 on page 15 the display shown
under "DAY" will appear for rec-on day.
3. Enter key (_) to select the Weekly Recording mode.
The screen shown at far left will appear.
4. Select the rec-on day for each week by number.
5. Continue with the program guide shown on pages 15
and 16 to complete programming.
TO CHECK PROGRAMS
a) When a Timer Recording has been set but is not yet In-progress.
(VCR power is OFF, TIMER Indicator is lit.)
1. Press the POWER Button to release the Timer Set mode.
2. Follow steps 1 and 2 on page 15 to check or re-enter the program contents.
• After checking, press the
b) When a Timer Recording
1.
_\llllllllll111111111 S
".I 3 9:3OPI0:00e I0_-
2.
EII_II|I|EAIII30_III
PLEASE CHECK PROGRAM
TO CLEAR PROGRAMS:
1.
P
ON
_ OFF CH
1 NONE
..PROG t CLEARED 3.
EXJT..PROG KEY
PROG Button twice to return to viewing channels.
has been set and Is now In progress.
Set the VCRFrV Selector to "VCR".
Press the PROG Button.
The screen at the left will appear with all programs currently set for recording.
The program-in-progress will be flashing.
The program being recorded will disappear after about 30 seconds.
Or, immediately return to the program being recorded by pressing the PROG
Button again.
After programming is complete and Power is still ON.
Follow steps 1 and 2 on page 15 to display the program.
Enter the program number you want to clear.
Press the CLEAR Button.
• The screen at the left will appear for a few seconds. Then to enter a new program
follow the program guide when the DAY screen appears.
-17-