Advertisement
A/V Inputs * Connector plugs which allow the introduction of
distinct audio and video signals into the TV from accessory
VCRs, camcorders, etc. These plugs bypass the normal tuner or
RF/Antenna signal circuitry.
Coaxial Cable * A single solid antenna wire normally matched
with a metal plug (F-type) end connector that screws (or pushes)
directly onto a 75Ohm input: found on the Te_vision or VCR.
Display * An on screen message or graphics that help the user
operate and adjust his Television feature controls. See On
Screen Displays (OSD).
Direct Audio/Video Inputs * Located on the rear of the TV
these connectors (RCA phono type plug) are used for the input
of audio and video signals. Designed for use with VCRs (or
other accessories) in order to receive higher picture resolution
and offer sound connection options.
Identify* Method by which a remote control searches and finds
an operating code for another product (such as a VCR or Cable
Converter). Once the code has been "identified" then the:TV
remote can operate and send commands to the other product.
Multichannel
Television
Sc,und (MTS) * The broadcast
standard
that allows for stereo sound to be transmitted with the
"IV picture.
On Screen Displays
(OSD) * Refers to the wording or
messages
generated
by the television
(or VCR) to help the user
with specific feature controls
(color adjustment,
programming,
etc.).
Menu * An on-screen listing of feature controls shown on the
Television screen that are made available for user adjustments.
Picture -In-Picture (PIP) * Term used when two pictmes are
shown on the TV screen at the same time. The smaller PIP
picture is supplied by a VCR (or other tuner/video playback
source). The PIP picture can also be moved and swapped with
the TV's main screen picture.
Pre-Amplifier
* The control center of a hi-fi system. Not
only amplifies source inputs, bm also allows for source
selection, volume, tone, balance and all other contn}ls that
affect the sound.
Programming * The procedure of adding or deleting channel
numbers into the Television's mem3ry circuits. In this way
the Television "remembers"
only the locally available or
desired channel numbers and skiips over any unwanted
channel numbers.
Remote Sensor Window * A window or opening found on
the Television control panel througla which infl'ared remote
control command signals are received.
Second Audio Program (SAP) */mother
or additional audio
channel provided for in the Multichannel Television Sound
(MTS) broadcast standard. The most frequently proposed use
for SAP is the simultaneous bilingual broadcast of 'IV
program material.
Status * Allows the user to quickly confirm what channel
number is currently being viewed. Status can also be used to
clear the Television of on screen displays or information
(rather than waiting for the display., to "time out" or
automatically disappear from the screen).
S-Video Input * Allows direct connection of high-resolution
video sources, such as a Super VHS videocasse.tte iecorder,
Laser Disc player, etc. Provides oplimum picture resolution,
sharpness, and clarity.
Twin Lead Wire * The more commonly used name for the
two strand 300 Ohm antenna wire _sed with many indoor and
outdoor antenna systems. In many cases this type of antenna
wire requires an additional adapter (or balun) in order to
connect to the 75 Ohm Input termir als designed into the more
recent Televisions and VCRs.
Variable Audio Output * An adjustable audio output which
allows for volume variations at the source.
55
Advertisement
