Advertisement
lease make these simple
checks before
calling f!_r
service.
These tips can save you
time and money since charges for
73/installation
and adjustment
of
customer
controls
are not
covered
under your warrartty.
No Power
No Picture
No Sound
Remote
Does Not
Work
TV Displays Wron
Channel
or No
Channels
Above 13
CAUTION: A video source (such as a video game, Compact Disc Interactive: - CDI, or
TV information channel) which shows a constant non-moving pattern on the TV screen,
can cause picture tube damage. When your TV is continuously used with such a source
the pattern of the non-moving portion of the game (CDI, etc.) could leave an image
permanently on the picture tube. When not in use, turn the video source OFF. Regularly
alternate the use of such video sources with normal TV viewing.
Check the TV power cord. Unplug the TV, wait 1 minute, then reinsert plug into outlet
and push POWER button again.
Check to be sure outlet is not on a wall switch.
Check antenna connections on the rear of the TV. Are they properly secured to the
antenna plug on the TV?
Check the (2ABLE TUNING control for correct position.
Check PICTFLIRESOURCE control for correct position VCR/AUX, AUX 2, or AUX 3
position without a signal source will result in a blank screen.
Check the CLOSED CAPTIONS control. Some TEXT modes could block the screen.
[• Check the VOLUME
and MUTE buttons
on the TV and remote.
]
heck the TV SPEAKER
NORMAL/OFF
control for the correct position.
If attempting
auxiliary
equipment
hook-ups,
check audio jack connections
and that the
auxiliary
equipment
is on and in the proper operating
mode:_.
II
Check TV-VCR-CBL "System" buttons on the remote. Press the remote's TV System
button to send commands to the TV; VC___RR
System to sent to VCR; etc.
Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkali_e batteries
if necessar3,.
Clean the remote and the remote sensor window on the TV.
i
epeat channel selection.
I
Add desired channel
numbers
(ADD/DELETE
CHANNELS
control)
into TV memory.
Check CABLE
TUNING
control for correct position.
This TV is equipped
with protective
circuitry
that shuts the TV off in case of moderate
power surges. Should this occur turn the TV back on by pressing
the POWER
button
once or twice, or unplug
and then replug the power cord at the AC outlet.
This feature
is NOT designed
to prevent damage
due to high power surges such as those
caused by lightning,
which is not covered
by your warranty..
Cleaning
and Care
• To avoid possible
shock hazard be sure the TV is unplugged
from the electrical
outlet before cleaning.
• When cleaning
the TV screen take care not to :_cratch or damage the screen surface
(avoid weaxing jewelry
or using
anything
abrasive-
do not use household
cleaners).
Wipe the front screen with a clean cloth da:mpened with water.
Use
even, easy, vertical
strokes when cleaning.
• Specially
designed
screen cleaning
kits are also available
which contain
anti-static
cleaners
and cloths designed
to get
into the ridges
of the TV screen. If interested,
ask your dealer about the MAG4600
Projection
TV Screen Cleaning
Kit or
call our toll-free
Accessory
Parts ordering
number
1-800-292-6066.
• Gently wipe the cabinet surfaces
with a clean cloth or sponge dampened
in a solution
of cool clear water and a mild soap
or detergent.
Use a clean dry cloth to dry the wiped surfaces.
• Occasionally
vacuum
the ventilation
holes or slots in the cabinet back.
• Never use thinners,
insecticide
sprays,
or other chemicals
on or near the cabinet,
as they might caase pernmnent
marring
of the cabinet finish.
54
Advertisement
