Magic Chef CES1350AAH Owner's Manual page 6

Press this pad
to cancel all
operations
except the
TIMER. The
time of day will
reappear in the
display.
[Timer] IV]"
Press or press
and hold these
pads to enter
the time, tem-
perature, or to
-- select Hi or Lo
broil.
1. Press the CLOCK pad.
t----_
• The colon will flash for 30 seconds to I Cleck _
indicate that the clock time may be set.
• tf the colon is not flashing, press the CLOCK pad
again.
for a bake or broil operation.
2. Set the correct time of day using the A
and V pads.
• If the • or V pad is not pressed
within 30 seconds, the program will
cancel. Press the CLOCK pad again.
The clock time can not be set if the control is set
CN
3. Press the CLOCK pad again to lock in the correct
time of day.
This pad is used to set the oven temperature for a
baking or roasting operation. See page 11 for additional
information.
1. Press the BAKE pad. (_ C_
2. Press the • or V pad to set i_
the oven temperature.
This pad is used to set the oven for a broiling operation.
See page 12 for additional information.
1. Press the BROIL pad. _ (_
2. Press the • or V pad to
select HI or LO broil.
The TIMER can be set from one minute (:01) up to 11
hours and 50 minutes (11:50). The timer does not
control the oven.
1. Press the TIMER pad.
• :00 will appear in the display. The TIMER indicator
• will flash in the display.
2. Press the • or V pad until the desired
time is displayed.
• The timing operation will begin as soon
as the time is set.
The flashing colon indicates that a timing operation
is in progress.
or oven
The colon will not flash if the time of day
temperature is displayed. The TIMER indicator •
will remain in the display as a reminder.
The timer count down will be displayed unless
another function is programmed after setting the
timer,
• A single beep signals the end of the operation.
"End" will appear in the display. If the time of day or
oven temperature is displayed "End" will not
appear.
• "End" will remain in the display and a short beep
will sound every 30 seconds to remind you that the
operation has completed.
3. Press the CANCEL pad and the time of
day will reappear in the display.
To cancel the timer operation: Press and
hold the TIMER pad for 4 seconds.