Table of Contents
Advertisement
VCR/TV CONNECTIONS
Antenna Splitter
(75-ohm to VHF/UHF 300-
ohm) (not supplied)
Q nonnnnno
I oE
LIIIIIIIIIIIIIIII IE
I llllllllllllLlll
= I_
IIIIIIIIIIIIIII_
To "OUT TO TV"
i=
75-ohm Coaxial Cable
with Antenna Adaptor
(accessory number 1,)
VHFIN
TV Antenna Terminals
1. Connect
the 75-ohm
Coaxial
Cable
with
Antenna adaptor (accessory number 1) to "OUT
TO TV" on the VCR. Connect the other end to the
Antenna Splitter (75-ohm to VHF/UHF 300-ohm)
(not supplied) or 75-ohm antenna input on back
of TV, as illustrated above.
2. Connect the wires marked "UHF" on the Splitter
to the
UHF terminals
on the
rear
of your
television.
3. Connect the wires marked "VHF" on the Splitter
to the VHF
terminals
on the
rear
of your
television.
NOTE: When the VCR power cord is plugged into a
120V electrical outlet, the clock of the VCR will show
"
:
". Don't worry. We will set it later.
-7-
Advertisement
Table of Contents
