Channel Presetting; (By Using The Remote Control) - Sears LXI series 580.53484390 Owner's Manual

CHANNEL PRESETTING (By using the Remote Control)
This VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels (VHF
channels 2-13, UHF channels 14-69 and CATV channels 1-125), but channel presetting is required as
described below after "ANTENNA/VCR CONNECTIONS" and "VCR/TV CONNECTIONS" are made as
described on pages 6 and 7.
"POWER"
ON/OFF
Button
"MENU"
Button
Number Buttons
"0" through "9"
"ADD/ERASE" Button
AUTO CHANNEL SE'n'ING
The automatic programming feature makes it easy
and convenient to program the TV station into the
tuner's memory.
Automatic programming is usually a "one-time'
procedure, but you will need to repeat it if you move
to a location that has different channels, or if the
power is interrupted.
• Turn on the power of both VCR and TV.
• Be sure that the TV is set to the video channel
(channel 3 or 4).
• Aim the remote control at the receiver on the front
panel of the VCR.
ON THE REMOTE CONTROL
1. Press the MENU button until the "MENU", as
illustrated, appears on the "IV screen.
PUSH SELECTION NUMBER
1 CLOCK SET
2 NORMAL PROGRAM
3 DAILY PROGRAM
4 WEEKLY PROGRAM
5 PROGRAM REVIEW
6 CALENDAR
_7 SET UP
TO END PUSH MENU
2. Press "7" button to select the SET-UP menu. The
SET-UP menu will appear.
PUSH SELECTION NUMBER
1 TV SYSTEM (TV)
2 TAPE SELECT ('1"120)
3 RENTAL POSITION (ON)
4 AUTO CHANNEL SET
5 COLOR MENU SELECT
6 LANGUAGE SELECT
7 AUDIO MODE SET
TO END PUSH MENU
-13-