GE Profile 22 Installation And Owner's Manual page 32

Installation Instructions
[] REPLACETHE BASE GRILLE
Replace the grille by installing the two Phillips
head screws.
ilii
[]_] SET THE CONTROLS
Set the controls to the recommended setting.
5 5
[REco E OCON,RO, SE,,,Nosl
0 °F IS RECOMMENDED 37 °F IS RECOMMENDED
[] START THE ICEMAKER
Set the icemaker power switch to the I (on)
position. The icemaker will not begin to operate
until it reaches its operating temperature
of 15°F (-9°C) or below. It will then begin
operation automatically. It will take 2-3
days to fill the ice bin.
Power
switch
Power ....
switch
NOTE:
In lower water pressure conditions, the water
valve may turn on up to 3 times to deliver
enough water to the icemaker.
32