GE Profile 22 Installation And Owner's Manual page 10

About the shelves and bins.
Not a// features are on a// models.
Refrigerator bin
] /
ii , i
iiii i ii /i
Freezer t//bout bin
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Bins
The larger refrigerator door bins and freezer
tilt-out door bins (]re adjustable.
Toremove: Lift the front of the bin straight
up, then lift up and out.
Toreplace or relocate: Engage the back side
of the bin in the molded supports on the
door. Then push down on the front of the bin.
Bin will lock in place.
Thesnugger helps prevent tipping, spilling or
sliding of small items stored on the door shelf.
Placea finger on either side of the snugger
near the rear and move it back and forth
to fit your needs.
Top freezer bin
A
CAUTION."
Be careful when
placing items in
the top bin, Make
sure that items
do not block or
f_?ll into the ice
chute.
Press tab and pull shelf fbrward
tO re/-F_ove
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you to
reach items stored behind others. The special
edges (]re designed to help prevent spills
from dripping to lower shelves.
To remove:
Slidethe shelf out until it reaches
the stop, then press down on the tub
and slidethe shelf straight out.
Toreplace or relocate:
Line the shelf up with the supports and slide
it into place. The shelf can be repositioned
when the door is at 90° or more. To reposition
the shelf, slide the shelf past the stops and
angle downward. Slide shelf down to the
desired position, line up with the supports
and slide into place.
Make sure you push the shelves all the way
back in before you close the door,
OuickSpace
TM
Shelf
This shelf splits in half and slides under itself
for storage of tall items on the shelf below.
This shelf can be removed and replaced
or relocated just like Slide-Out Spillproof
Shelves.
On some models, this shelf cannot be used
in the lowest position.
10