GE Profile 22 Installation And Owner's Manual page 25

Installation Instructions
MOVING THE REFRIGERATOR
Ffl LOADING THE RERIGERATOR
ONTO A HAND TRUCK
Leave all tape and door pads on doors until
the refrigerator is in its final location.
To move the refrigerator, use a padded hand
truck. Center the refrigerator on the hand truck
and secure the strap around the refrigerator.
DO NOT OVERTIGHTEN THE STRAP.
1"71 REMOVE THE BASE GRILLE
Remove the grille by removing the two Phillips
head screws.
If the refrigerator must go through
any entrance that is less than 38" wide
the doors must be removed. Proceed
to Step 3.
DO NOT remove the handles.
If all entrances are more than 38" wide,
ski p to Installing the Refrigerator.
r31 DISCONNECT THE WATER COUPLING
(on some models)
If the refrigerator has a water dispenser,
there is a water line from the cabinet into
the bottom hinge on the freezer door that
must be disconnected.
To disconnect, push in on the white collar
of the coupling and pull out the tubing.
White collar
Bottom
freezer
hinge
25