Clock And Timer - Fisher & Paykel OR90 Series Installation Instructions And User Manual

Buttons:
Timer
Cooking time
End of cooking time
Decreases the number shown on the display or
changes the volume of the beeps
Increases the number shown on the display
Illuminated symbols:
A - flashing - oven in automatic position but not set
A - steady illumination - oven set for automatic cooking
Cooking taking place
Timer in operation
Setting the clock
When first connected, or after a power failure, '0
To set the clock, press the
Note: Changing the time will delete any automatic program.
Using the timer
The timer can be set for up to 23 hours and 59 minutes.
To set the timer, press the
To check the remaining time press the
When the time is up, the timer will beep. Press the
Note: if 'A' is flashing on the display, press the
Setting the timer volume
You can select from three volume levels by pressing the
.
00' will flash on the display.
and buttons together and then the
button, then the and
button.
and

Clock and timer

Figure 25 Clock display and control buttons
and
buttons.
button to turn it off.
buttons together.
button.
23
buttons.