GE JV247 Owner's Manual And Installation Instructions page 8

Installation Instructions
DAMAG E - SHIPM ENT/INSTALLATION
- If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
- If the unit is damaged by the customer, repair or
replacement isthe responsibility of the customer.
- If the unit is damaged bg the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and installer.
MOUNTING SPACE
24", 30" or 36" to 3
match cooklopwidth m
Bottomedge of
cabinet needs
to be 30" or
morefrom
the cooking
surface
66" or more
fromthefloor
tothetopof
thehood
NOTES:
- Hood width may be greater than the width of the range
or cooktop, but it may not be smaller.
- Ensure the range or cooktop is installed per
manufacturer's installation instructions.
- If you are going to vent your range hood to the outside,
see the "Ducting Requirements" section for exhaust duct
preparation.
TOOLS YOU WILL NEED
Flat-bladeand Phillips
screwdrivers
Saw(saber o r keyhole)
Pencil
Electric drill
Duct tape
Metalsnips
(in some
applications)
1/4"pivoting
hexsocket
Pliers Tapemeasure Wire stripper
Flashlight Caulking Level 1/4" Nutdriver
PARTS INCLUDED
PART
QUANTITY
I
4
Grease Filteronly(JV338)
Charcoal Filteronly
(JN327andRN328)
Grease FilterandCharcoal Filter
(JV24X, JV347, J V348andJV367
MountingScrews
(8- 18"x 3/4" Phillips panhead)
Exhaust A daptor
(for3W'x 10"rect.venting)
Exhaust A daptorScrew
(8- 18"x 3/8" Phillipspanhead
or hexhead)
8