Function Button Settings - Panasonic TH-65PB1E Operating Instructions Manual

Function Button Settings

Set the functions that operates when
Select "Function Button Settings" in "Setup" menu and
press button.
• Function Button 1, Function Button 2
The following functions are set to the FUNCTION button.
ECO Mode settings / 3D Settings / Signal / On/Off Timer Setup
The menu is displayed. (Example: ECO Mode settings)
ECO Mode settings
ECO Mode
Power save
Standby save
PC Power management
DVI-D Power management
No signal power off
Scrolling bar
Activates the "Scrolling bar only" screensaver.
After 15 minutes, the display enters standby mode.
INPUT (SLOT)* - INPUT (NETWORK)
Simply press to select the input.
* "INPUT (SLOT)" is displayed when an optional Terminal Board is installed.
When a Terminal Board with dual input terminals is installed, "INPUT (SLOT A)" and "INPUT (SLOT B)" are
displayed.
Touch-Pen
Press and turn Touch Pen mode On/Off.
Network Setup
"Network Setup" menu is displayed.
Computer Search
The list of connectable computers on the network is
displayed.
AV Mute
Mutes the audio and video. To exit this mode, press any button.
• Function Button Guide
The function display setting for the FUNCTION button is con¿ gured.
On: Press the FUNCTION button to display the function list of the button.
Off: The function list is not displayed.
Function
1:Touch-Pen
is pressed.
Custom
Off
On
Off
Off
Disable
2:Scrolling bar
Function Button Settings
Function Button 1
Function Button 2
Function Button Guide
Note:
Factory settings are as follows.
FUNCTION1 button: Touch-Pen
FUNCTION2 button: Scrolling bar
Pressing the FUNCTION button clears the menu.
To exit this mode, press any button.
Touch-Pen On
Multi-Live
Switch to the Multi-Live mode when using the
"Wireless Manager mobile edition 5.5".
The operation starts.
Touch-Pen
Scrolling bar
On
45