Accessories; Accessories Supply; Remote Control Batteries - Panasonic TH-65PB1E Operating Instructions Manual

Accessories

Accessories Supply

Check that you have the accessories and items shown
Operating
Instruction book
Power supply cord

Remote Control Batteries

Requires two R6 batteries.
1. Pull and hold the hook, then open
the battery cover.
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline
batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precaution:
1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: "Zinc Carbon" with "Alkaline").
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the Plasma Display set.
6. Do not burn or breakup batteries.
7. Batteries must not be exposed to excessive heat such as sunshine, ¿ re or the like.
Software DVD-ROM × 1
• elite Panaboard software
• elite Panaboard book
• Operating Instructions
Display Operations
Network Operations
Electronic Pen Operations
• Software license statements
GNU GENERAL PUBLIC LICENSE
GNU LESSER GENERAL PUBLIC LICENSE
Clamper × 1
TMME289
2. Insert batteries - note correct
polarity ( + and -).
Remote Control
Transmitter
N2QAYB000691
Ferrite core × 2
J0KG00000014
Use the Ferrite cores to comply with the EMC standard.
(refer to "Operating Instructions, Network Operations")
"R6 (UM3)" size
-
+
+
-
Batteries for the Remote
Control Transmitter
(R6 (UM3) Size × 2)
Electronic Pen set
Refer to "Operating Instructions,
Electronic Pen Operations".
3. Replace the cover.
9