Options Adjustments
Touch Panel settings (Settings when using Touch Panel)
The mode to restrict NANODRIFT Saver (see page 40) operation when using Touch Panel (available as an option) is set up.
Options
Weekly Command Timer
Audio input select
Touch Panel settings
Press ACTION ( ) button
Touch Panel settings
Touch Panel mode
On
Calibration mode
Calibration mode
This setting is used in calibrating a touch panel.
You can con¿ gure the setting if "Touch Panel mode" is "On".
Touch Panel settings
Touch Panel mode
On
Calibration mode
ª
Calibration mode
60
1/3
Set "Touch Panel mode" to "On".
select
1
adjust
2
Select "Calibration mode" and then press
select
1
set
2
The screen is displayed in the middle and NANODRIFT is deactivated for 180
seconds.
After 180 seconds or when you have the menu displayed with a remote control,
Calibration mode is cancelled.
Note:
For information on how to set up Calibration, please see Touch Panel instruction
manual.
NANODRIFT Saver in Touch Panel mode: On
The value set for NANODRIFT turns into "On" and
displayed in gray.
The moving distance of NANODRIFT is limited to 5 × 5
dots to prevent pointer drift on a touch panel.
.
When the menu is not displayed (normal screen)
Hold down
for over 3 seconds.