Sound Adjustment; Sdi Sound Output - Panasonic TH-42PF50E Operating Instructions Manual

Sound Adjustment

1
2
Select to adjust each item.
3
Item
Normal: Emits the original sound.
Sound Mode Dynamic: Accentuates sharp sound.
Clear:
Bass Adjusts low pitch sounds.
Mid Adjusts normal sounds.
Treble Adjusts high pitch sounds.
Balance Adjusts left and right volumes.
Surround Select On or Off.
Note: Bass, Mid, Treble and Surround settings are memorized separately for each Sound Mode.
Helpful Hint (
While the "Sound" menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.

SDI Sound Output

This menu is available only when selecting a slot that any of the following terminal boards is installed:
HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-FB11DHD)
SDI Sound Output
Left Channel
Right Channel
Sound Out
Level Meter
Press to display the Sound menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Press to exit from adjust mode.
Attenuates human voice.
/ Normalisation)
Normalise
2/2
Left Channel
Channel 1
Channel 1
Right Channel
Off
Off
Sound Out
Level Meter
Details
Item
Channel 1 to Channel 16
Selects left audio channel.
Channel 1 to Channel 16
Selects right audio channel.
On Off
On: Enables audio output.
Off: Disables audio output.
Off 1-8ch
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.
Off: Hides the audio level meter.
1-8ch: Displays the audio level meter (1-8ch)
9-16ch: Displays the audio level meter (9-16ch)
Sound
Normalise Normal
Sound Mode
Bass 0
0
Mid
Treble 0
0
Balance
Surround
Details
9-16ch
1/2
Normal
Off
33