Options Adjustments - Panasonic TH-42PF50E Operating Instructions Manual

Options Adjustments

1
2
3
4
5
Item
Weekly Command Timer Sets Weekly Command Timer. (see page 57)
Audio input select Set up the sound when an image input is selected. (see page 59)
Touch Panel settings Set while using Touch Panel (available as an option). (see page 59)
Input Search Set auto input switching for when there is no signal. (see page 61)
On: Displays all the following on screen.
• Power on display
• Input signal switch display
Onscreen display
• No signal display
• Mute and the remaining time of off-timer after
Off: Hides all the items above from view.
Adjusts the input signal when the unit is turned on.
Off
*1 "SLOT INPUT" is displayed when an optional Terminal Board is installed.
Initial input
*2 "COMPONENT" may be displayed as "RGB" depending on the setting of "Component/RGB-in select". (see page 50)
Notes:
• Only the adjusted signal is displayed. (see page 17)
• This menu is available only when "Input lock" is "Off".
Press
Off
Off: Sets normal volume.
On: Sets your preferred volume.
Initial VOL level
Notes:
• When "Maximum VOL level" is "On", the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when "Initial VOL level" is "On" and cursor is on the menu.
Press
Off
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Notes:
Maximum VOL level
• If the "Maximum VOL level" is set lower than the "Initial VOL level", the "Initial VOL level" automatically
becomes the same as the "Maximum VOL level".
• The volume display can go up to 63 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when "Maximum VOL level" is "On" and cursor is on the menu.
54
Press to display the Setup menu.
Press to select "OSD Language".
Press for more than 3 seconds.
Press to select "Options".
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from Options menu.
1
SLOT INPUT* VIDEO
When a Terminal Board with dual input terminals is installed, "SLOT INPUT A" and "SLOT INPUT B" are displayed.
button to adjust the volume when the unit is turned on.
On
button to adjust the maximum volume.
On
Options
Shipping
Adjustments
was pressed.
2
COMPONENT* HDMI
Options
Weekly Command Timer
Audio input select
Touch Panel settings
Input Search
Onscreen display
Initial input
Initial VOL level Off
Off
Maximum VOL level
Input lock Off
Button lock
Off
Remocon User level Off
Options
Off-timer function Enable
Initial Power Mode
Normal
ID select
Remote ID
Off
Serial ID Off
Display size
Off
Studio W/B
Off
Studio Gain
Off
Options
Slot power O f f
Power On Screen Delay Off
Clock Display Off
All Aspect Off
Auto Setup Manual
Rotate Off
Advanced Motion Resolution On
Power On Message (No activity power off)
On
3D Safety Precautions
On
DVI PC NETWORK
1/3
On
Off
0
0
2/3
0
3/3