Panasonic WJ-NV200K Installation Manual page 56

Register face images [Face registration]
Use this page to register new face images, to check already registered face images or to assign names to the face images.
• [Add >] button
Register new face images. (☞ Page 57)
• [Sensitivity]
Set the sensitivity applied to the face matching process.
1(Low)/ 2/ 3/ 4/ 5(High)
Default: 3
• [Face image]
This is the area where registered face image is displayed.
• [Appearance]
Displays the time and date when a face image was reg-
istered.
• [Name]
Enter the name to be assigned to the face image (in up
to 12 characters) using the on-screen keyboard (☞ page
36).
• [Matching]
Select whether or not to activate face matching actions.
A maximum of 8 images can be matched at the same
time.
On: Activates face matching actions.
Off: Does not activate face matching actions.
Default: Off
56
• [Auto image scan] button
Automatically searches for images suitable for face
matching for approximately 3 seconds before and after
the face image is registered. For details refer to [Auto
image scan] in "Automatically search for face images
[Auto image scan]" (☞ page 57).
• [Delete]
To delete images, mark their checkboxes.
• [Update] button
Use this button to register or delete the changes made
to the image, the assigned name and the setting for face
matching actions.
• [Undo] button
Use this button to undo the changes made to the image,
the assigned name and the setting for face matching
actions, and to return it to the state it was in when last
clicking the [Update] button. Once the [Update] button
has been clicked, the state before updating cannot be
restored. In addition, a face image once deleted cannot
be restored. A face image once deleted cannot be
restored.
• [Setup area >] button
The face matching setup area window will be displayed
(☞ page 58 "Set up face matching area [Setup area]").
• [Back] button
Return to the "Advanced face matching alarm setup"
page.