Configure The Settings Relating To Monitors [Monitor]; Set Up The Main Monitor [Main Monitor]; Set Up The Live Monitor [Live Monitor] - Panasonic WJ-NV200K Installation Manual

Configure the settings relating to monitors [Monitor]

The settings relating to the display of the main monitor, the live monitor connected to the recorder and the monitor of the PC con-
nected via a network are configured on the setup menu - the "Advanced setup" menu - the "Monitor" page.
The settings relating to image switching such as multiscreen display and sequence display of live images are also configured on
this page.
The "Monitor" page has [Main monitor], [Live monitor] and [Advanced setup] tabs.

Set up the main monitor [Main monitor]

Perform settings relating to the main monitor display such as the display position of the camera title.

Set up the live monitor [Live monitor]

Set up the live monitor by selecting the camera images to display, the image display duration, etc.
■ Live sequence
Set the display sequence for camera images (image switch-
ing).
[Duration]
Set the interval (duration) for switching camera images.
10 s/ 15 s/ 30 s
Default: 10 s
■ Camera title
[Display]
Determine whether or not to display the camera title on the
main monitor.
On: Displays the camera title.
Off: Does not display the camera title.
Default: On
[Position]
Select the position to display the camera title on images.
L-Upper/ L-Lower/ R-Upper/ R-Lower
Default: R-Upper
[Camera title]
Enter a camera title to display for each camera using the on-
screen keyboard (☞ page 36)
[Camera selection]
Select the cameras to be included in the sequence display.
Mark the checkbox next to the desired camera. The selected
cameras will be displayed in numerical order.
[Secret view]
This is a function that skips camera images displayed with a
single screen display on the main monitor when displaying
with the sequential display on the monitor for live images.
Determine whether or not to set up secret view.
On: Enables the secret view function.
Off: Disables the secret view function.
Default: Off
Note:
• The image on the live monitor may momentarily go black
when images are switched on the main monitor.
59