Stop Buzzer Beeping - Panasonic WJ-NV200K Operating Instructions Manual

Event action
Alarm action Display the alarm
icon on a web
browser
Display the alarm
message on a
web browser
Record the alarm
logs
Send a mail that
notifies of an
event occurrence
Provide an alarm
notification to a
PC according to
the Panasonic
alarm protocol
setting
*1 b: Takes action regardless of the setting, ●: takes action in accordance with the setting, ×: takes no action
*2 Since no check is carried out when the action mode "Face matching alarm only" is set to [Off], there is no
entry made into the log either.

Stop buzzer beeping

The buzzer sounding to announce an alarm or error can be stopped from the recorder's front panel.
Step 1
Press the [BUZZER STOP] button.
→ The buzzer will stop.
Description
The alarm icon will be displayed on the event
error display area of the web browser.
A window that notifies of an event occurrence will
be displayed on the web browser.
* The alarm message displayed last has priority.
To close the window, click the [x] button.
Time and date of the event and event information
will be recorded in a log list.
An e-mail notifying of the event and its time and
date (alarm mail) will be sent to registered e-mail
addresses (up to 4).
When an event occurs, a notification will be sent
to a PC in accordance with the settings made
under [Panasonic alarm protocol]. (☞ Installation
Guide)
Note:
• The buzzer can also be stopped by resetting the
alarm action or error action. The [BUZZER STOP]
button does not reset any of the other alarm
actions.
37
1
Mode*
A B C D
b b
× ×
× ×
● ●
b b b b *2
× ×
● ●
× ×
● ●