Storing Frequencies Into Memory - Grundig SATELLIT 750 Owner's Manual

Am/fm-stereo/shortwave/airwave band radio with ssb (single side band)
Hide thumbs Also See for SATELLIT 750:
Table of Contents

Advertisement

Available languages

Available languages

SATELLIT 750
OWNER'S MANUAL
FM ST. (FM STEREO) BUTTON
Press the FM ST. button when in the FM band to take the radio in
or out of stereo reception mode. When it's in stereo mode, STEREO
appears under the left side of the frequency in the display, next to
FM. As long as you are not using headphones or earphones, it can
be left in mono mode.
BASS AND TREBLE KNOBS
Use these knobs to control the Bass and Treble to your liking. Turn-
ing clockwise increases bass or treble. Turning counterclockwise
decreases bass or treble.

STORING FREQUENCIES INTO MEMORY

There are two separate sets of 500 memories, allowing for great
flexibility of memory storage. Note the chart, below.
Memory PAGE 0, noted as 'P0', consists of 500 memories, 100 as-
signed for MW, SW, SSB and Air Band; 50 memories each assigned
for FM and LW.
Memory PAGE 1 – 10, noted as 'P1', 'P2', etc., consists of 50
memories per page, 500 memories total.
To manually store a frequency into a memory, first choose the page,
then the memory location and then store the frequency. In the
instructions below note that MEMORY=PRESET. See the instructions
below.
• Turn on the radio and tune to a station that you want to store
into memory.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents