Using The Light Button; Line-In Socket; Line Out Sockets - Grundig SATELLIT 750 Owner's Manual

SATELLIT 750 OWNER'S MANUAL

USING THE LIGHT BUTTON

A quick press of the LIGHT button gives about 5 seconds of il-
lumination to the SIGNAL strength indicator and the display. A long
press lights these for as long as the radio is turned on, so be careful
if you're operating on batteries, because it will make them drain
faster. If you're AC adapter is connected, it's fine to keep the light
on while the radio plays.
EARPHONE SOCKET
The earphone socket is on the lower left front of the radio and is la-
beled EAR. Plug in earphones and headphones using a 3.5 mm (1/8
inch) stereo plug. Turn the volume down before plugging them in.

LINE-IN SOCKET

The LINE-IN socket is on the lower left front of the radio and allows
you to route the sound from another device to the Satellit 750. Use
a cord with a 3.5 mm (1/8 inch) stereo plug. This socket uses an
industry standard line level input.

LINE OUT SOCKETS

On the back of the radio are the left and right line-out sockets,
labeled LINE OUT. These sockets use an industry standard line level
output and can be routed to any industry standard line level input.
The external antenna sockets are used to connect the SATELLIT 750
to advanced performance antennas.
17