Activating And Deactivating The Alarms; Storing Stations Into Memory - Grundig G5 Owner's Manual

SETTING THE CLOCK AND WEEKDAY
The G5's clock is in 24-hour format. Turn off the G5.
1. With the G5 off, press the PAGE/TIME button for about 2 sec-
onds or until the hour digits start flashing.
2. Within 3 seconds, use the tuning knob to set the correct hour;
then press F1-7 to highlight the days you wish the alarm to
activate.
3. Immediately press PAGE/TIME again, noting that the minute
digits start flashing.
4. Within 3 seconds, use the tuning knob to set the correct min-
utes.
5. Immediately press PAGE/TIME again. The clock is set.
ACTIVATING AND DEACTIVATING THE
ALARMS
For an alarm to turn on the radio, it must be activated. To activate
the alarm to be used, turn off the G5 and press the appropriate
alarm button, F1-4. This causes the timer activation symbol to ap-
pear in the upper left corner of the display, activating the selected
alarm. To deactivate the alarm, press the appropriate F1-7 button,
causing the alarm activation symbol to disappear.

STORING STATIONS INTO MEMORY

The G5 has 700 memories (also called presets), arranged in 100
pages, with each page holding 7 memories. Buttons F1-7 represent
memory locations.
Note that when storing into an already occupied memory position,
its contents will be replaced with your new entry.
1. Turn on the G5.
2. Tune to the desired station.
10
G5 OWNER'S MANUAL