30
3
Service and Repair Manual
Model 840S
Press metal insert of
fan to here.
Press fan (3) onto armature (30)
such that the metal insert of the fan
bottoms against the fan journal
shoulder of the armature shaft.
After the armature assembly (30) is
installed into the tool, the bearing cup
(86) is to be placed on the rear armature
bearing (1), (already pressed onto the
armature shaft), prior to assembling the
motor cover (47) to the tool.
NOTE: Do not dislodge the bearing cup
from the bearing during assembly.
6
30
1
86