Mazda CX-9 Owner's Manual page 300

CX-9_8CM9-EA-12I_Edition1 Page300
Thursday, September 13 2012 2:37 PM
Interior Comfort
Audio System
qOperating the Radio
Audio button
Radio ON
Press the audio button (
the on-screen tab.
Band selection
Touch the on-screen tab to switch
the band as follows:
FM1→FM2→AM
NOTE
is displayed when FM1 is selected,
l
is displayed when FM2 is
selected, and is displayed when AM
is selected.
If the FM broadcast signal becomes weak,
l
reception automatically changes from
STEREO to MONO for reduced noise, and
the STEREO indicator will no longer
display.
Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
6-36
Form No.8CM9-EA-12I
NOTE
If the power supply is interrupted (fuse blows
) and touch
or the battery is disconnected), the preset
channels will be erased.
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
NOTE
When an
received, a receivable multicast channel is also
received.
Seek tuning
Pressing the seek tuning button (
will cause the tuner to seek a higher or
lower frequency automatically.
NOTE
If you continue to press and hold the seek
l
tuning button (
continue changing without stopping.
When an
l
received, a receivable multicast channel is
also received.
Black plate (300,1)
Seek tuning
buttons
Manual tuning
dial
broadcast is being
, )
, ) the frequency will
broadcast is being