Mazda CX-9 Owner's Manual page 250

CX-9_8CM9-EA-12I_Edition1 Page250
Thursday, September 13 2012 2:36 PM
Driving Your Mazda
Switches and Controls
Switch Position
Wiper operation
Type Type
No.
A B
Single wipe cycle (mist)
Intermittent
Low speed
High speed
With AUTO position
Switch Position
Wiper operation
Type Type
No.
A B
Single wipe cycle (mist)
Auto control
Low speed
High speed
Variable-speed intermittent wipers
Set the lever to the intermittent position
and choose the interval timing by rotating
the ring.
5-74
Form No.8CM9-EA-12I
Black plate (250,1)
Type A
INT ring
Type B
INT ring
AUTO (Auto-wiper control)
When the wiper lever is in the AUTO
position, the rain sensor senses the
amount of rainfall on the windshield and
turns the wipers on or off automatically
(off intermittent low speed high
speed).
The sensitivity of the rain sensor can be
adjusted by turning the switch on the
wiper lever.
From the center position (normal), rotate
the switch downward for higher
sensitivity (faster response) or rotate it
upward for less sensitivity (slower
response).