Marantz SR8300 User Manual page 55

GENERAL MALFUNCTION
If the equipment malfunctions, this may be because an electrostatic
discharge or AC line interference has corrupted the information in the
equipment memory circuits. Therefore:
- disconnect the plug from the AC line supply
- after waiting at least three minutes, reconnect the plug to the AC
line supply
- re-attempt to operate the equipment
Memory backup
• In case a power outage occurs or the power cord is accidentally
unplugged, the SR8300 is equipped with a backup function to
prevent memory data such as the preset memory from being
erased.
52
HOW TO RESET THE UNIT
SELECTOR
DOWN
DIS LAY CLEAR MEMO
SELECT ENTER
7.1CH-IN DVD DSS TV
MULTI-S K SLEE S-DIRECT
STANDBY
MULTI ROOM A/D NIGHT
OWER ON/STANDBY HONES
Should the operation or display seem to be abnormal, reset the unit
with the following procedure.
The SR8300 is turned on, press and hold the SELECT and AUX1
buttons simultaneously for 3 seconds or more.
Remember that the procedure will reset the settings of the function
selector, Surround mode, delay time, TUNER PRESET etc., to their
initial settings.
VOLUME
DOWN U
TUNING U
F/ T-MODE -SCAN
MUTE ATT
VCR 1 VCR2/DVD-R CD TA E CD-R TUNER
AUX1
AUX1 IN UT
DIGITAL S-VIDEO VIDEO L AUDIO R
AUX2