CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and Grounding or Polarization – This product may be equipped with a safety standards. There are, however, some installation and operation polarized alternating-current line plug (a plug having one blade precautions which you should be particularly aware of.
Page 4
Servicing – Do not attempt to service this product yourself as Replacement Parts – When replacement parts are required, be opening or removing covers may expose you to dangerous sure the service technician has used replacement parts specified voltage or other hazards. Refer all servicing to qualified service by the manufacturer or have the same characteristics as the personnel.
Page 5
Now, every moviegoer can hear the sound exactly as the moviemaker correcting the tonal and spatial errors that occur. intended. When the THX mode of the SR8200 is on, three distinct THX DTS can be enjoyed in the home for either movies or music on of technologies are automatically added: DVD’s, LD’s, and CD’s.
Use these jacks for connection to some external power amplifiers. SR8200. The SR8200 has two component video input connectors to obtain the color information (Y, C ) directly from the recorded DVD...
Page 7
⁄9 External IR transmitter terminal Connect the AC power cables of components such as a DVD and CD If the SR8200 is located inside a rack or cabinet that will not allow player to these outlets. SWITCHED and UNSWITCHED outlets are infrared beams to transmit to 2way remote commander, you will need provided.
C S (Status) button Insert the new batteries (AA type) with correct (+) and (–) polarity. Press this button to see (jump to) the status of SR8200 on LCD panel. D Ex (Exit ) button Press this button to exit on screen menu .
REMOTE-CONTROLLABLE RANGE The distance between the transmitter of the remote control unit and the IR SENSOR of the SR8200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible.
INPUT SELECT 2 OPERATING AMP & TUNER AMP PAGE 3/8 To control the SR8200 by your RC3200A, you have to select the device AMP or TUNER on HOME screen. MAIN AMP PAGE 1/8 Tape, LD, AUX1, AUX2, VCR2, CD-R These buttons are used for selecting an input source.(see page 33)
SURROUND MODE 3 AMP PAGE 7/8 Power On and Off buttons These buttons are used to turn on or off SR8200 AM, (LW), FM buttons These buttons are used to switch between FM, AM, and LW mode of the tuner.
Page 12
TUNER PAGE 2/3 SHOW THE STATUS OF SR8200 ON THE LCD OF RC3200A RC3200 has 2way communication with SR8200, it shows some status screen for SR8200. 1/2 Status To show 1 page of status screen, press S button . Frequency Direct button This button is used to select the mode of frequency direct input.
WORKING WITH MODES ADJUSTING THE SETTINGS RC3200A starts up in Use mode. In this mode you operate your The RC3200A settings can be adjusted in the Setup mode. devices. For customizing the RC3200A (adjusting the settings, Press and hold the Mode button for 3 seconds. learning buttons or recording macros) you have to switch to the The Mode screen appears.
SECOND SETUP PAGE Tap the Revert button. A message screen appears to confirm or cancel the revert On the second setup page you can adjust: process. • the date; • the time. Press OK or Cancel. TO EXIT SETUP MODE Adjust the Date Press the Mode button.
Press and hold the button on the existing remote control you want LEARNING COMMANDS to learn to the RC3200A. If an IR code or a brand is not in the database, you can program When the RC3200A receives an IR code: RC3200A commands by transmitting IR signals from your existing •...
Page 16
Tap Macro button. Tap Start. Macro screen appears. The HOME screen appears with the 'Recording' label at the top of the screen. The buttons you tap on this screen will not be recorded. From the HOME you can go to the different devices or you can press the Extra hard button to go to the Extra screen with delays and beeps.
RC3200edit is the tool for you to use. You can find more information and updates of the software on http:// www.marantz.com. RC3200edit is the visual editor for creating and configuring RC3200A Configuration Files (NCF) on your computer. An NCF is a file that is used to define the RC3200A behaviour and look for the LCD touch screen.
IMPORTANT NOTICES Take care not to scratch the touch screen Use your finger to tap the LCD touch screen or use plastic-tipped pens intended for use with touch screens. Never use an actual pen, pencil or other sharp object on the LCD touch screen.