Product Description - Shindaiwa M242 Owner's/Operator's Manual

Safety Labels
This label indicates the minimum distance between
front handle and rear grip per ANSI B175.3.
Figure 1

Product Description

Using the accompanying illustrations
as a guide, familiarize yourself with
your unit and its various components.
Understanding your unit helps ensure
top performance, long service life, and
safer operation. See Figure 2 and 2a.
WARNING!
Do not make unauthorized modifica-
tions or alterations to any of these
units or their components.
Prior to Assembly
Before assembling, make sure you have
all the components required for a com-
plete unit:
■
Engine/Outer tube assembly
■
Handle
■
Assembly Tool (s)
■
Operator's Manual
■
Emission Control Warranty
Statement
■
Safety Glasses
Carefully inspect all components for
damage.
4
Safety and Operation Information Labels: Make sure all information
labels are undamaged and readable. Immediately replace damaged
or missing information labels. New labels are available from your
local authorized Shindaiwa dealer.
M242 Multipurpose
Tool Carrier
Handle
Outer Tube
Coupler
Figure 2
IMPORTANT!
The terms "left", "left-hand", and "LH";
"right", "right-hand", and "RH"; "front"
and "rear" refer to directions as viewed
by the operator during normal operation.
IMPORTANT!
Throttle Lockout
Lever
Grip
Ignition
Switch
Tank Guard
Throttle
Trigger
Latch protector
Coupler Screw Knob
Figure 2a
Spark Plug
Air Cleaner
Fuel Tank
Latch
M23002a